Appliance-Specific Safety Instructions For Jigsaws; Original Accessories/Auxiliary Equipment; Information On Saw Blades; Operation - Parkside PMST 100 A1 Traducción Del Manual De Instrucciones Original

Appliance-specific safety instructions
for jigsaws
■ Hold power tool by insulated gripping
surfaces only, when performing an
operation where the cutting accessory
may contact hidden wiring or its own cord.
Hold or touch the metal housing
allowed. Cutting accessory contacting a "live"
wire may make exposed metal parts of the
power tool "live" and could give the operator
an electric shock.
Original accessories/auxiliary
equipment
■
Use only the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.

Information on saw blades

The Parkside basic equipment includes saw blades
principally for use with wood.
▯ 2 wood sawblades
NOTE
► You can use any saw blade provided it has
a suitable mounting.
Saw blade type
suitable
PMST 100 A1

Operation

Fitting/changing the saw blade

is not
♦
♦
♦

Fitting the rip fence

The rip fence
hand side of the appliance.
♦
♦
♦
unsuitable
♦
WARNING!
► Always remove the plug from the power
socket before working on the appliance.
Undo the locking screw
Insert the saw blade
blade holder . The saw teeth facing forward.
ATTENTION!
■ The saw blade must sit in the groove of
the guide roller .
Retighten the locking screw
key .
can be fixed on the left- or right-
Push the rip fence into the insertion openings
Screw both the locking screws on the insertion
openings .
Set the desired cut width with the help of the
scale on the rip fence
insertion opening
Fig. A: Cutting width 4 cm
Tighten the two locking screws.
NOTE
► If you want to use the rip fence for curved
cuts, insert a nail through the bottom hole,
which is in line with the saw blade. Otherwise
you get a wrong diameter.
using the Hex key
into the slot of the saw
using the Hex
and the edge of the
(see also Fig. A).
GB │ IE │
15
.
.
■