Legal Requirements; Intended Use; English - Scott VANGUARD JACKET PROTECTOR Manual Del Usuario

SCOTT VANGUARD JACKET PROTECTOR
INCLUDING P.P.E :
-BACK PROTECTOR (EN 1621-2 :2014)
-SHOULDER (EN 1621-1 :2012)
• I. INTRODUCTION
Congratulations on choosing this quality SCOTT product. Before use, please read the fol-
lowing instructions carefully. Please keep these instructions in safe custody. This specif-
ic product line has been developed to offer you the best comfort and an engineered fit.
• II. LEGAL REQUIREMENTS
These protectors are considered to be items of Personal Protector Equipment (PPE)
of Category II and as such are subject to the requirements laid down by the European
directive 89/686/EEC. The CE marking may be allocated by SCOTT only once the pro-
tector has undergone an "EC Type Examination" or "Certification Procedure" at a noti-
fied European body.
The protectors in this information sheet undergo EC certification at a Notified European
Body, Italcert (NB0426), Viale Sarca 336, 20126 Milano, Italy which certifies that our
products meet the requirements of directive 89/686/EEC.
BACK PROTECTOR
These SCOTT back protectors have been designed within the requirements of the
European safety standard EN 1621-2:2014 "Motocyclist's protective clothing against
mechanical impact - Part 2: Motorcyclists' back protector – Requirements and tests
method". The back protectors have been submitted to impact tests according to EN
1621-2:2014 and have been classified as type FB (= Full Back).
SHOULDER GUARDS
The shoulder guards have been submitted to impact tests according to EN 1621-1:2012
'S' and have been classified as type A, Level 1.
• III. INTENDED USE
This protector is strictly limited for the respective use and temperatures indicated by
the pictograms on the approval label (see chapter VI. Info on product). The protector is
explicitly not to be used above or below indicated temperatures, nor for other kinds of
sports (see sport icon).
• IV. USER RESTRICTIONS
APPLICATION AREA
The back and shoulder protectors are designed and manufactured to provide limited
protection against impact in the event of a fall. All protector plates provide a limited
protection only in areas covered by the plates. They can arch both forward and back-
ward to simulate and support natural movement. These backwards movements pre-
vent the direct transmission of force onto the edge of the protector.

ENGLISH - 4