Quick Programming Guide - golmar T3301ML Manual De Instalación

SCHEMATIC DIAGRAMS
One access door audio systems with 1+'n' installation.
3301/AL
Access control module
1 2 3 C
4 5 6 0
7 8 9
CN1
~ ~ B+ B- C1 N1 NC2 C2 NA2 P SN L1
(*) The enclosed varistor must be used.
The enclosed diagram uses a TF-104 transformer (12Va.c.) as access control module feeder.
(*) The enclosed varistor must be used when connecting a.c. lock releases.
The relay 1 operation depends on the programming and the relay 2 operation depends
its wiring.
In case of simultaneous activation of two lock releases (see duplicated codes on page 41),
an additional TF-104 transformer must be used.
In case of security lock releases with reversed operation (the lock release operates when
no voltage is applied), connect the lock release between C2 and NC2 terminals,
or program relay 1 as normally closed (see page 40).
TF-104 TF-104
transformer transformer
PRI SEC PRI SEC
~ ~ ~ ~ ~ ~ ~ ~
Mains Mains
C
ombined on 'Stadio Plus'
door panels.
EL510 TF-104
sound module transformer
CN1 SEC PRI
L2 PS 4 N1 N2 5 1 CV ~2 ~1 ~ ~ ~ ~
Red
(*)
S
tand alone operation.
3301/AL
Access control module
1 2 3 C
4 5 6 0
7 8 9
CN1
~ ~
B+ B- C1 N1 NC2 C2 NA2 P
(*)
(*)
44 45
0 0 4
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
2 1
2 2
2 3
2 4
2 5
2 6
2 7
2 8
3 0
4 1 0
5 1 0
6 1 0 3
6 2 0 3
6 3 0 3
7 0 2 7 1 8 2 8
8 0 3 1 4 1 5 9
9 0 1

QUICK PROGRAMMING GUIDE

Q
uick programming guide.
Codes lenght (4, 5 or 6 digits)
1st code, Relay 1
2nd code, Relay 1
3rd code, Relay 1
4th code, Relay 1
5th code, Relay 1
6th code, Relay 1
7th code, Relay 1
8th code, Relay 1
1st code, Relay 2
2nd code, Relay 2
3rd code, Relay 2
4th code, Relay 2
5th code, Relay 2
6th code, Relay 2
7th code, Relay 2
8th code, Relay 2
Panic code
Relay 1: N/O (0) N/C(1)
Relay 1: Single shoot (0) Stable(1)
Relay 1: Activation time (01 to 20s.)
Relay 2: Activation time (01 to 20s.)
Panic: Activation time (01 to 20s.)
Installer PIN code
User PIN code
Keypad tones: Off (0) On(1)
Gray text: factory default