Cleaning Oven Glass; Catalytic Panel - CORBERO CCHC SF 45 MEC Manual De Instrucciones

Cleaning Oven Glass

Lift by pressing on plastic latches on left and right side as shown
in figure 10 and pulling the profile toward yourself as in figure 11.
Glass is released after profile is removed as shown in figure 12. Remove
the released glass by pulling toward yourself carefully. Outer glass is fixed
to oven door profile. You can perform glass cleaning easily after glasses
are released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that profile
is seated properly in place.
Figure 10

Catalytic Panel *

It is located behind the wire racks of the oven, at the right and left walls
of oven cavity. Catalytic panel removes offensive odour and provides using
your appliance at its best performance. Over time, oil and food odours
permeate into enamelled oven walls and heating elements. Catalytic panel
absorbs any food and oil odours, and burns them during cooking to clean
your oven.
Detaching catalytic panel
To remove catalytic panel; first remove the wire racks. Once wire racks
are removed, catalytic panel will be free. It is advised to replace the
catalytic panel once every 2-3 years.
Figure 11
31
Figure 12