Sharp UA-PM50E Manual De Uso página 17

Be sure to remove the power plug from the wall outlet.
FILTERS
HEPA Filter
Tag
Deodorizing Filter
UNIT
SENSORS
Dust sensor
Odour sensor
Gently remove dust from HEPA Filter and Deodorizing Filter with a
vacuum cleaner attachment or similar tool.
CAUTION
Do not WASH in water and DRY in the sun.
The fi lters are fragile, be careful not to apply too much force.
• HEPA Filter
Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the fi lter will be
damaged.
• Deodorizing Filter
The maintenance can be applied to the both sides.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
CAUTION
•Do not use volatile fl uids
Benzine, paint thinner, polishing powder, etc., may damage the surface.
•Do not use detergents
Detergent ingredients may damage the unit.
1. Remove the Catch Panel.
2. Remove the Pre-fi lter.
3. Remove the Dust sensor fi lter.
4. If it is very dirty, wash it with water and
Dust sensor
fi lter
Gently remove dust from the odour sensor,
using a vacuum cleaner attachment or similar
Odour sensor
tool.
dry it thoroughly.
E-13