Loading The Bottom Rack; Loading The Silverware Basket - Kenmore 587.1233 Serie Guía De Uso Y Cuidada

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparing and Loading Dishes

Loading the Bottom Rack

Features and appearance of racks and
silverware basket may vary from your model.
The lower rack is best for plates, saucers,
bowls, and cookware. Large items should be
placed along the edge so they do not block
the spray arm rotation. For best results, place
bowls, casseroles, and sauce pans with soiled
surface facing down or toward the center. Tilt
slightly for better drainage.
Make sure tall items do not block the rotation
of the spray arm.
Be sure pan handles do not protrude through
the bottom of the rack and block the rotation
of the spray arm.
10 place settings standard loading pattern
12 place settings standard loading pattern

Loading the Silverware Basket

Features and appearance of racks and
silverware basket may vary from your model.
Load the silverware basket while it is in the
bottom rack or take the basket out for loading
on the counter or table.
Place small items like baby bottle caps, jar
lids, corn cob holders, etc., in a covered
section. Close the cover to hold small items
in place.
Use suggested loading patters, as shown, to
increase washability of your silverware.
Be sure nothing protrudes through bottom of
basket or rack to block the spray arm.
Do not mix silver and stainless to avoid
damaging the silver fi nish.
The silverware basket can be separated and
placed in several locations in the bottom rack.
Load silverware in all sections or just one,
depending on your load.
11 11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido