Calculated Industries Scale Master Classic 6020 Guia Del Usuario página 9

Rolling or Entering a Custom Scale
1) Press [Mode] until "1: CUS 1" appears
in the scale box display.
2) Press [Subtract/Count] and [Scale]
simultaneously. "
main display. If you are entering a
scale, skip to step 4.
3) Roll desired dimension. "
appears in the main display.
Note: For greater accuracy, you may want to roll
the known distance several times, then enter
the distance times the number of rolls (for
example, roll a distance 5 times and if the
distance is 3 feet, enter 15 feet).
4) Press [Scale]. The display will show
zeroes and the units of measurement
annunciator will begin flashing (
Imperial Mode,
5) If you do not want to change the units
of measure, skip to step 6. If you want
to change the units of measure, press
[M1+] until you reach the desired units.
6) Press [Scale] to begin setting the scale
distance. The left-most digit will
begin flashing. Press:
[M1+] to increment this digit,
[Subtract/Count] to decrement,
[Scale] to advance to next digit,
[Mode] to move back one digit.
7) Continue to press [Scale] until all dig-
its are set and the display returns to
zero. The scale is now stored.
" will appear in the
ROLL
for Metric Mode).
MM
" now
ROLLING
-
FT IN
9 – User's Guide
for