30
Command 38 Emptying of change giving tubes:
This command is used to inventory the coins in the tubes of the coin mechanism. To obtain the allotment
from tube 1 (coins of lower value) proceed as follows:
1. Programming mode, display views ..........................................................................................Command 00
2. Dial 38 and press B, display views ............................................................................................ Tube no. 00
3. Dial 1 and press B,
The coin mechanism starts giving out coins from the chosen tube until the release of pushbutton B.
Command 39 Filling up of change giving tubes:
Proceed as follows:
1. Programming mode, display views ..........................................................................................Command 00
2. Dial 39 and press B
3. Insert the coins into the coin mechanism.
4. Press again pushbutton B
N.B. If the procedure is not correctly carried out, you can find wrong values in commands 09 - 10.
E
N
G
L
I
S
H
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
Spirali HDR Panzer - Issue 00