Zyxel NBG460N Manual Del Usuario página 12

2 Press the WPS button on both devices. It doesn't matter which button is pressed first.
You must press the second button within two minutes of pressing the first one.
Your NBG460N has a WPS button located on its housing, as well as a WPS
button available in the web configurator used to manage the NBG460N.
Other WPS-enabled devices should have at least one similar WPS button.
3 The WPS LED (
4 Check if your devices are connected by trying to connect to the Internet using the
device you connected to the NBG460N. If you can do this, then your WPS connection is
successful.
5 To add another WPS enabled device to your wireless network, press the WPS buttons
on your NBG460N and your next WPS-enabled device.
Congratulations! You are now ready to connect to the Internet wirelessly through your
NBG460N.
2 minutes
) on the NBG460N blinks for a few seconds, then shines steadily.
ENGLISH
12