General Description - Whittaker Smart Care TRIO Manual Del Operador

GENERAL DESCRIPTION

Your Smart Care TRIO machine is designed to give you excellent
performance and long life.
This machine is ideal to clean carpeted floors in facilities like offices, schools,
hospitals, airports, hotels, casinos, and similar commercial applications.
Reading this manual will help you get the most from its many features.
CAUTION: This machine is for indoor use only.
CAUTION: This machine shall be stored indoors only.
NOTE: This machine has been designed exclusively for carpet
restoration and not for hard surfaces.
ASSEMBLY:
In the box you will find: machine base (shipped with brushes
installed), and the handle assembly.
A. R e m o v e t h e m a c h i n e b a s e f r o m t h e p a c k i n g
and place it squarely on the floor. To do this, raise the bottom
handle upright until it locks.
B. Remove the handle assembly from the packing and place it
on a scratch - free surface.
C. Insert the top handle assembly into the bottom handle
assembly and affix the four screws through the washers.
D. Place assembled handle on handle cone assembly indicated by
the arrow in fig. Plastic cord holders should face towards rear of
machine, the same as large cord hook.
Be s u r e t h e c o n n e c t o r
c o m p l e t e l y o r t h e c o n n e c t o r s m a y b r e a k a n d possibly
cause damage to the locking mechanism.
To attach the handle, grasp the ribbed plastic connector (1) at the
base of the handle, align with the two cones on the lower handle
bar, press down and turn clockwise until it clicks into place. To
remove handle, turn counter-clockwise and lift up.
a s s e m b l y i s l o c k e d
(
A^
C^
i n
D^
)
7