Watts MILUX RF Guía De Usario página 6

TECHNICALS CHARACTERISTICS
Operating temperature
Measured temperature precision
Set temperature precision
Set temperature range
GB
Regulation
characteristics
Electrical Protection
Batteries
Radio Frequency
Certifications
ITCS (Optional)
The thermostat Intelligent Temperature Control System will activate your
installation in advance to assure the desired temperature at the hour
programmed following your weekly program.
This automatic control system works in the following way:
When you start your thermostat for the first time, it will measure the time taken
by your installation to reach the set temperature. The thermostat will re-
measure this time at each program change to compensate external
temperature change & influence. You can now program your thermostat
without the need to adjust the temperature in advance because your
thermostat does it automatically for you.
0°C - 50°C (o 32°F – 122°F)
0.1°C (or 0.2°F)
0.5°C (or 0.5°F)
in comfort & reduced : 5°C – 35°C (or 41 - 95°F)
in anti-freeze : 0,5°C – 10°C (or 33 – 50°F)
Cycle (PWM) : 15 minutes
Anti-short cycle: 3 minutes OFF, 2 minutes ON
Class II - IP30
3x LR6 AA 1.5V alkaline batteries (> 2 years)
IMPORTANT: You have 1 minute to change the
batteries.Past this time, you may have to
reprogram your thermostat if all segments lit up
at power up.
433.92 MHz, <10mW.
CE. EN 300220-3, EN 301489-1
(Radio frequency certifications)
6