Transmission And Reception; Squelch; Monitor; Keypad Lock - Midland G5 C Manual De Uso

19
20
21
22
23
24
For displaying the channel/sub audio tone
To momentarily display the PMR446 channel and the subadio tone used in the
pre-set channels, go to the desired channel (from 9 to 24) and keep pressed
the buttons ▲▼ for 5 seconds.

Transmission and reception

To communicate, all radios in your group must be set on the same channel.
To transmit, press and hold the PTT button and speak in a normal voice into
the microphone. The "TX" icon will appear continuously on the LCD display
while transmitting.
You can communicate also using an external accessory or a hand mic, pressing
and holding the PTT button on the side of the hand mic.
To receive a CALL, release the PTT button. The "RX" icon will appear on the
display when your radio is receiving a transmission.

Squelch

In MIDLAND G5 C the squelch (filter to suppress noises) is always active.

Monitor

Press MODE and /
reception of weak signals.

Keypad Lock

Keep pressed the button / for about 5 seconds and the lock function will be
activated. "Lc on" will appear on the display. To disable this function, keep pres-
sed again the button / for 5 seconds approx. The display will show "Lc of".
Midland G5 C user manual
corresponds to channel 05 31
corresponds to channel 07 31
corresponds to channel 02 31
corresponds to channel 04 31
corresponds to channel 06 31
corresponds to channel 08 31
at the same time to open the squelch and allow the
| 7