Table Of Solutions - Midland G5 C Manual De Uso

Table of solutions

Problem
The radio doesn't
switch on
The radio switches
off shortly after it
has been switched
on
The battery does
not recharge
The radio switches
on but is unable to
receive signals
It is not possible to
communicate with
other parties
Midland G5 C user manual
Possible cause
The batteries are dischar-
ged and/or have not been
installed correctly.
Discharged batteries.
The battery-charger has
not been connected or
installed correctly.
The site of installation is
too shielded.
The volume is too low
Incorrect CTCSS
An incorrect radio chan-
nel has been selected.
The radio is installed in a
shielded area or is too far
from the party you are
communicating with
Incorrect CTCSS
Solution
Verify that the batteries
are charged and that
they have been correctly
installed.
Recharge the batteries if
they are rechargeable or
change them .
Inspect the connections
of the battery-charger
and the installation of the
batteries.
Move to another area.
Adjust the volume.
Check that the CTCSS
tone corresponds to the
one set by the parties you
are communicating with.
Select the same radio
channel used by the
parties you are communi-
cating with.
Move to another area.
Check that the CTCSS
tone corresponds to the
one set by the parties you
are communicating with.
| 19