Specifications - Byron DIC-24122 Manual De Usuario

Instruction manual
• Monitor does not switch on.
• Monitor is switched on but no
image is displayed.
• The picture quality is not
good.
• The volume is too low.
• Connected gate opener does
not work.
• Connected gate opener and
electric strike does not work.
12
• Make sure that the monitor is
connected to the power
source.
• Do not use extension cords,
as the voltage might not be
sufficient to power on the
device.
• Check the wire connections
between the outdoor unit and
the monitor (including the
correct polarity).
• Adjust brightness and
contrast in settings menu.
• Make sure there is no direct
light source pointed at the
monitor.
• Adjust the volume
• Test the installation and the
12 V relay using wired
control. Refer to the
instruction manual of the gate
opener.
• Use suitable accessories with
12 V, 500 mA specification.
Only install lock having a
mechanical storage system.
• Video and audio signal is too
weak or with interference
• There is no sound coming
from the outdoor unit.
8

Specifications

Monitor
Screen size
Color Configuration
Video System
Effective Pixels
Consumption Current
Operation Temperature
Operation Humidity
Supply Voltage
• The monitor is installed too
close to other electronic
devices. Move other electrical
devices away.
• Please check the distance
between indoor unit with
outdoor unit, and also check
the thickness of the cables
used,
• The microphone might be
obstructed or stained. Clean it
carefully with a soft
moistened cloth.
7"(Diagonal) inch
R.G.B.delta
PAL/NTSC
800X3(RGB)X480
450±200mA
-10°C ~ +50°C
85%(Max)
DC 15V 1A