EnGenius EP801 Manual De Usuario página 28

1. Press MENU (Right) soft key to enter menu mode while the phone is in
standby mode.
Re: You can either press
key to confirm the selected menu. Or Press the digit directly to confirm
the selected menu. For example, press
select the Ring Volume.
2. Press "1" to select KeyGuard (see Key Guard operation on page
3. Press "2" to add, delete, edit, view and edit the phonebook (see
Phonebook instruction on page
4. Press "3" to set Sounds settings:
a. Press "1" to select Ring Volume:
Two options for ring volume: Line (for incoming call) and Intercom (for
intercom call). Set each option respectively.
When setting each option, use
options: "Off", "Low", "Medium", "High", "Vibrate" and "Vibrate & High".
Press SELECT (Left) soft key to save selection. Default = Medium.
b. Press "2" to select Ring Tone:
Two options for ring tone: Line (ring tone for incoming call) and
Intercom (ringer for intercom call). Set each option respectively.
Use the or to scroll through 8 ringers, press
(Left) soft key to save selection. Default = 1.
c. Press "3" to select Key Volume when a key is pressed:
Use or to scroll through 4 options: Off, Low, Medium, and
High. Press SELECT (Left) soft key to save selection. Default =
Medium.
d. Press "4" to select Key Tone:
Use the or to scroll through 4 options: 1, 2, 3 and 4. Press
SELECT (Left) soft key to save selection. Default = 1.
5. Press "4" to set Call Settings:
a. Press "1" to set Dial Prefix:
(1) Press or
Default = Off.
(2) If "On" is selected, the handset is prompted to enter the prefix
number, up to 14 digits can be entered.
(3) Use Delete (Right) soft key to edit prefix number.
(4) Press SAVE (Left) soft key to confirm the selection.
When this feature is turned on, the LCD will prompt the user on
(5)
each outgoing phone call, the current prefix is also displayed.
(6) This feature is useful for access code, calling card, and credit
or , followed by SELECT (Left) soft
MENU (Right) soft key -3-1 to
40 ).
or to scroll through 6
SELECT
to turn of or off the dial prefix feature.
~55~
b. Press "2" to Group Select: see Handset Group Subscription on page
38
c. Press "3" to set Call Barring: see Call Barring operation on Page 44.
d. Press "4" to set Feature Call: see Feature Call operation on Page 46.
e. Press "5" to set Baby Monitor: see Baby Monitor operation on Page
53.
35 ).
f. Press "6" to set Call Manager: see Call Manager operation on Page
50.
g. Press "7" to set Area Code:
The area code setting allow calls within local and regional area codes
to be dialed without prefix.
(1)
(2)
6. Press "5" to set Phone Settings:
a. Press "1" to set Mic Gain: See Mic Gain operation on Page 52.
b. Press "2" to set Any Key TALK:
Use
Re: a. When set "on", press any key (except
c. Press "3" to set LCD Contrast:
(1)
(2)
d. Press "4" to set LCD Backlight:
(1)
(2)
e. Press "5" to set Name Tag:
(1)
(2)
Re: When Set "on", if matching the caller ID with the phone book
card calls, etc.
.
Set Local Area Code :
Press MENU-4-7-1 to set the LAC. Enter the local area code (3-
digit) then press SAVE (Left) soft key to confirm selection.
Set Country Area Code :
Press MENU-4-7-2 to set the country code. Enter the code (3-
digit) then press SAVE (Left) soft key to confirm selection.
CHANGE (Left) soft key to select and confirm on or off.
incoming call.
b. When set "on", the handset will automatically answer the call
while lift the handset from cradle.
Use or to scroll through option 1~8. Default is 4.
Press SAVE (Left) soft key to confirm selection.
Use or to scroll through option 1~3 (1.8 seconds
2.On 3.Off ). Default is "8 seconds".
Press SAVE (Left) soft key to confirm selection.
Use or to scroll through option on or off. Default is
"Off".
Press SAVE (Left) soft key to confirm selection.
entries; once matched, the LCD screen will display the name or
nickname instead of pure caller ID info (needs Call Waiting with
Caller ID service from local telephone company)
~56~
) to answer the