EN
* Energy-rich, high-frequency interference can
cause fluctuations in speed. The fluctuations
disappear, however, as soon as the interference
fades away.
The technical specifications quoted are subject
to tolerances (in compliance with the relevant
valid standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be
higher or lower depending on the operating
conditions, the condition of the power tool or
the accessories.
Please allow for breaks and periods when the
load is lower for assessment purposes. Arrange
protective measures for the user e.g. organisatio-
nal measures based on the adjusted estimates.
Vibration total value (vector sum of three directi-
ons) determined in accordance with EN 60745:
a
=
Vibration emission value
h, P
(surface grinding)
K
=
Uncertainty (vibration)
h, P
Typical A-effective perceived sound
L
=
sound-pressure level
pA
L
=
acoustic power
WA
K
, K
= Uncertainty
pA
WA
34
Ι Finimaster Pro
Manual
Finimaster Pro