Cleaning And Care - Klarstein Steakreaktor Pro Manual Del Usuario

Turn off and allow to cool down
If the set time has run out or the grilling procedure has been interrupted, the fans keeps
on running. This is important to make sure that the case does not heat up to much
by the residual heat in the device. Turn off the mains only when the fan has stopped
automatically.

CLEANING AND CARE

The device may only be cleaned after it has cooled down completely, the main switch
has been switched off and the earthing contact plug has been removed from the socket
and the device is therefore completely disconnected from the mains.
First remove the grill grate, the drip tray, the drip tray and then the grill attachment. The
grill should be completely sprayed with an appropriate cleaner. Pay attention to metal
compatibility when choosing a cleaner. Let the cleaning agent act, and if the grill insert
is very dirty spray several times. After a sufficient reaction time, thoroughly rinse the
insert with the aid of a washing-up brush with plastic bristles. Do not use abrasives, wire
brushes or steel sponges to prevent scratches and corrosion.
The grill room and the housing must be regularly and thoroughly cleaned with a slightly
damp cloth. Do not spray cleaners in or on the device. Detergent should be applied to
the appliance using a cloth. Prevent strong mechanical loads on the heating during the
cleaning process. Attention: residues may ignite, so clean thoroughly.
Note: The removable parts are made of high quality stainless steel and are suitable
for cleaning in the washing machine.
EN
39