Master audio XCELLENCE SERIE Manual Usuario página 5

Master Audio
between 50Hz-20kHz (-10dB) for X-12CE and 53Hz-18kHz (+/- 3 dB) with a usable
bandwidth between 45Hz-20kHz (-10dB) for X-15CE.
They have 1000W continuous amplification (800W + 200W), thermal protection,
output short circuit protection, maximum power limiters for each channel, and
protection against overvoltage. The DSP includes 5 presets which can be selected
either accessing the cabinet's rear control panel or via the computer with Ethernet
connection. The FACTORY preset gives a maximum flat response in free field
conditions; NEARFIELD has -3dB in mid range for medium volume, close range
listening; SPEECH has -9dB bass, -6dB high for voice use with a microphone;
MONITOR gives a flat response in half space (floor position); XOVER has a high
pass filter at 100Hz for bass frequency back up (subwoofer).
The X12CE and X15CE cabinets are connected using the XLR balanced connector.
Mains supply is through PowerCon at 230V.
They are built in birch plywood, which has a high resistance to vibrations and
humidity with black polyurea paint finish. The front face is protected by a 1.5 mm thick
steel grille with acoustically transparent grey cloth.
Wedge shape. As onstage monitor, the front baffle is oriented at 35º from vertical.
They include one in-built lateral handle for an easy and comfortable transport.
Fig.1. X12CE and X15CE external dimensions
2.2. Presets
The X12CE and X15CE include five manufacturer presets for different types of
application. The DSP system can also store up to 23 other presets, depending on
user requirements
Xcellence "E "Series. Ver1.0 Nov12
5