Parallel Connection - Master audio XCELLENCE SERIE Manual Usuario

Master Audio
Fig.12. Presets for cardioid configuration
Fig.13. Back energy rejection at 40Hz / 50 Hz / 63Hz
IMPORTANT: If the user wants to adjust its own cardioid preset there is a
specific manual to do it. Please, contact the sales department of Master Audio
for more information.
7. CONNECTING

7.1. Parallel connection

Connect the signal (mixing desk output) to INPUT on the first unit. Use the LINK
output to transfer the INPUT signal to the second unit and thus sequentially for further
units. All of the units in this chain must be switched on.
For the mains connection in parallel use the cable with grey Neutrik PowerCon
NAC3FCB at one end and the blue Neutrik PowerCon NAC3FCA at the other end.
Do not connect more than 4 X12CE, X15CE or X15LTE units using the
AC Stacking output connector.
Xcellence "E "Series. Ver1.0
[LPF90+3]
[LPF90+6]
[CARDIOID]
[LPF90+3]
[LPF90+6]
Nov12
18