SORHEA BIRIS II 50 Manual De Instalación página 31

SORHEA
The choice of operating mode is made using switches 5 and 6. The position of the switches must
be identical on the receiver column (RX) and on the associated transmitter column (TX).
Mode "AND"
5 6
MODE
ATTENTION :
The selected operating mode is validated by the receiver and transmitter when the power
is on for the barrier or when the column is taken out of alignment mode (turning switches 1
& 2 to OFF).
(Once the barrier is powered on and in detection mode, changing the position of the
operating mode switches (5 and 6) has no effect on the selection of modes.)
ON
OFF
Mode "OR"
ON
OFF
5 6
MODE
- 30 -
BIRIS II 50/100/200
Mode "AND/OR"
Shunt terminals 5 & 6 of the RX
and TX columns.
OFF
5 6
MODE
ON