Remote Control - Marantz professional PMD-500D Guia Del Usuario

Remote Control

Important: Point the remote control at the remote sensor when operating it. If the
remote sensor is exposed to direct sunlight, strong artificial light (like from an
interverter-type fluorescent lamp), or infrared light, the unit or remote control may not
function properly.
1. Power ( ): Press this button to turn PMD-500D on/off. The light above the button
on PMD-500D will be red when it is in standby mode or green when it is on. Make
sure the AC In is properly connected to a power outlet. Do not turn the unit off
during media playback—doing so could damage your media.
2. Mute: Press this button to mute PMD-500D's audio. If this button does not work,
set the Output Volume to Variable instead of Fixed (see
> Setting > Audio Setup
3. Eject ( ): Press this to eject the disc tray.
4. HDMI: Press this button to select the next available picture resolution: Auto
(PMD-500D will detect
480p/576p, 720p, 1080i, or 1080p.
5. Channel: Press this button to change the audio playback mix: Left Mono, Right
Mono, Mix–Mono, or Stereo (default).
6. Volume –/+: Press these buttons to lower or raise the volume (respectively). If
these buttons do not work, set the Output Volume to Variable instead of Fixed
(see Adjusting the Settings > Setting > Audio Setup
7. Number Buttons (0–9): Press these buttons to enter their corresponding
numbers. While playing media and not viewing an additional menu or screen,
entering a number or numbers will select that disc chapter or audio track.
8. Return: Press this button to return to the previous menu/screen.
9. Clear: Press this button to clear (delete everything in) the current field.
10. PBC: Press this button to enable playback control when using compatible SVCD or VCD discs. Refer
to the information supplied with your disc for available playback control functions.
11. Setup: Press this button to open the Setup Menu. See
for more information.
12. Copy/Del: Press this button to access the media management options in the media center, which will
allow you to copy and delete files on your USB and SD/SDHC card drives.
13. Info: Press this button to view available information about the source on your display. The options
depend on the current playback source. See the
14. Cursor Buttons (): Use these buttons to navigate through the files and folders.
15. OK: Press this button to confirm a selection.
16. GoTo: Press this button to jump to a specific file, track, chapter, time, etc. The available options
depend on the current playback source. See the
17. Stop (): Press this button to stop playback.
18. Play/Pause ( ): Press this button to start, pause, or resume playback.
19. Title: Press this button to stop playback and return to the disc's title menu.
20. Search Back/Forward (
you press the same button, the speed will increase. You can do this up to 5 times before it returns to
normal playback speed.
21. Skip Back/Forward (
chapter, or file during playback. When viewing the file list in the media center, press one of these
buttons to skip to the previous or next page of files.
to learn how to do this).
the optimal resolution
/ ): Press these buttons to rewind/fast-forward, respectively. Each time
/ ): Press one of these buttons to skip to the previous or next track,
Adjusting the Settings
automatically), 480i/576i,
to learn how to do this).
Operation > Adjusting the Settings > Setting
Operation chapter for more information.
Operation chapter for more information.
PMD - 5 00 D
MUTE
HDMI CHANNEL VOL VOL
1 2 3
PBC
4 5 6
SETUP
COPY
7 8 9
/DEL
0
RETURN CLEAR INFO
OK
GOTO TITLE
SUB DISC
AUDIO Q-PLAY
TITLE MENU
SLOW STEP REPEAT A - B
PROG MARK ZOOM ANGLE
MEDIA
5