Marantz professional PMD-500D Guia Del Usuario página 7

Setup
Connections
Power
Items not listed in Introduction > Box Contents
Important: Connect all cables securely and properly (with stereo cables: left with left, right with right). Do
not bundle or wrap them with the power cable.
Not all of these steps may apply to your specific audio/video setup, but you will need to do Steps 1 and 5
at the very least.
1. Connect PMD-500D to your TV monitor or display by doing one of the following:
• Use an HDMI cable to connect the HDMI Output to the HDMI input of your TV monitor or display.
• Use an RCA composite video cable to connect the Composite Video Output to the composite
video input of your TV monitor or display.
• Use RCA component (Y/Pb/Pr) video cables to connect the Component Video Outputs to the
component video inputs of your TV monitor or display.
• Audio only: Use a coaxial cable to connect the coaxial output to the coaxial input of your TV monitor.
Alternatively, use a digital optical TOSLINK cable (IEC60958 Type II S/PDIF compatible) to connect
the optical audio output to the optical input of your TV monitor.
2. Optional: Connect PMD-500D to your sound system by doing either/both of the following:
• Use XLR cables or a stereo RCA cable to connect the audio outputs (balanced or unbalanced) to
the analog inputs of your external receiver, amp, powered speakers, etc.
• Use a digital optical TOSLINK cable (IEC60958 Type II S/PDIF compatible) to connect the optical
audio output to the optical input of your external receiver.
3. Optional: Connect a USB hard drive or SD/SDHC card with playable content to the USB port or SD
card slot.
4. Optional: Use a 9-pin D-Sub cable to connect the Remote Input to a host device (usually a computer)
that will control it.
Note: Visit marantzpro.com
5. After completing all the connections, use the included power cable to connect the AC In to a power outlet.
TV or display
to download the serial protocol guide for PMD-500D.
MASTER VOLUME
SOURCE SELECT
QUICK SELECT
ZONE 2 ZONE 2 ZONE 3 ZONE 3 INFO OPTION
ON/OFF SOURCE ON/OFF SOURCE STATUS DIMMER 1 CBL/SAT 2 Blu-ray 3 GAME 4 NETWORK
ENTER VIDEO L - AUDIO - R SETUP MIC
PHONES BACK SETUP
AUX 1
HDMI 7 5V/1A
AUX 1
IN-Command
S E R I
INTEGRATED NETWORK AV RECEIVER
Receiver, amp, powered monitors, etc.
are sold separately.
E S
AVR-X4000
7