Festo Compact performance CPV-GE-ASI Serie Manual De Instrucciones página 13

3 Addressing the AS-Interface valve terminal
type 10
3.1 Assign the AS-Interface slave address
We recommend the use of the Festo addresser ASI-PRG-
ADR part no. 18959 with adapter cable part no. 18960 (or
Siemens PSG)
Before connecting an AS-Interface slave to the bus, assign
a non-reserved address to each slave. Set the desired ad-
dress with the AS-Interface addresser. Permitted range
1 ... 31.
Please note:
– The factory setting of the terminal is address 00
– ID code and IO code see type plate on the terminal
– It is not necessary to parametrize the AS-Interface slaves
3.2 Output addresses of the solenoid coils (top view)
Terminal with 2 double valves
2 4
3
1
Festo CPV..-GE-ASI-... 0112b English
Terminal with 4 single valves
1 2 3 4
13