WINK leakSMART Manual De Instalación Y Operación página 13

leakSMART
Professional Installation Steps
Open Close
11
™
8.
Attach the AC power cord adapter to the valve cover and plug into
the nearest 110 volt outlet
• Using an extension cord is not recommended — please use the
10 ft. AC power adapter cord in this package
• An optional 9 ft. AC power adapter extension wire is also available.
This, and other leakSMART
getleaksmart.com
9.
Check valve cover function by turning on a faucet and pressing the
"Open" and "Close" buttons
• When the valve is open, it will display a steady green light
and water will run
• When the valve is closed, it will display a steady red light and water
will stop running
• The valve can now be paired with the leakSMART
accessories, can be purchased at
™
Sensor(s) and hub
™