Led Indication - PSC Magellan 8100 Guía De Referencia Rápida

LED
INDICATION
Scale at Zero
Scanner Active
Good Read
Indication
Program Mode
Indication
Sleep Mode
Indication
Host Disabled
Field Replace-
able Unit (FRU)
Warning (Error
Mode)
FRU Indication
a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled.
Quick Reference Guide
Table 2. Green and Yellow LED Functions
DURATION
Yellow LED on steady
a
Green LED on steady and dim
a
Green LED - bright flash
a
Green LED - Continuous flash-
ing
Green LED blinks at a
2-second rate
1 second off, 1/10 second on
Audible low tone 3 seconds.
Alternating Green/Yellow LED
flashes continuously.
Green LED flashes a coded
sequence in concert with the
speaker.
Your scanner may not be programmed to display all indications.
COMMENT
The scale is at rest and reads zero
weight.
The scanner is ready for operation.
Scanning is immediately available.
Indicates a bar code has been read
and decoded.
Indicates the scanner is in Label Pro-
gramming Mode. Cycle power to exit
Programming Mode.
The scanner motor and/or laser have
automatically switched off and the unit
has entered Sleep Mode due to
extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure
has been detected. If a low tone is
heard, but continuous flashing is not
observed, the scanner can still func-
tion in a limited capacity. Call systems
support for service in either case.
Occurs ONLY upon Volume/Tone but-
ton push following a FRU warning.
Enables service technicians to identify
FRU failures.
3