OPERATION INSTRUCTIONS
1.
Press the ON/OFF button to turn the scale on.
2.
Wait until "0-00.0" appears on the digital display.
3.
Place a pad on the weighing tray. Make sure that the edges of the pad are on the tray
and are not touching the surface on which the scale is positioned.
4.
Press the ZERO button to cancel the weight of a pad or other accessory that is on the
weighing tray.
5.
Place the infant on the scale. The display will blink "
determined.
6.
Press the REWEIGH button to weigh the infant again (to achieve a more accurate
result).
7.
Remove the infant from the scale. The digital display should continue to read the
infant's weight until REWEIGH or ZERO button is pressed.
NOTE:
If the scale was not used for 2 minutes, the scale will turn off for power and batteries life
saving. To restart the scale press the ON/OFF button.
MAINTENANCE
GENERAL
This section provides instructions for maintenance, cleaning, troubleshooting and operator
replaceable parts for the Pro Plus
maintenance operations than that described in this section should be performed by qualified
service personnel.
MAINTENANCE
Before first use and after periods of non-use, check the scale for proper operation and
function. If the scale does not operate correctly, refer to qualified service personnel.
1.
Check overall appearance of the total scale for any obvious damage, wear and tear.
2.
Inspect AC charger for cord cracking or fraying or for broken or bent prongs.
CLEANING
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Disconnect the scale from the AC power source.
1.
Clean all external surfaces with a clean damp cloth or tissue. Mild soap and water
solution may be used. Dry with a clean soft cloth.
2.
Do not immerse the scale base into cleaning or other liquid solution.
3.
Do not use Isopropyl Alcohol or other solutions to clean the display surface.
TM
Neonatal Pediatric Scale Model 2200KL. Other
5
------
" until the weight of the infant is
------