Size & Width Functions - Brother P-touch 2200 Guía De Usuario

The character size can be adjusted using both the Size and Width functions. Since the charac-
ter size that can be used depends on the width of the tape, the following table shows the char-
acter sizes that can be used with each tape width.
The default size setting is AUTO and the default width setting is OFF. The currently selected
size setting is always shown by the indicators above the display. All of the size indicators light
up when the AUTO setting is selected. In addition, when the ON width setting is selected, the
Wide indicator lights up.
With the AUTO size setting, the machine compares your text with the width of the installed
tape and automatically adjusts the characters to the largest possible size. However, six other
point sizes are also available and each can be printed in wide characters.
Size setting
(in points)
6
9
12
18
SIZE & WIDTH FUNCTIONS
Tape widths
1/4" (6 mm)
3/8" (9 mm)
1/2" (12 mm)
3/4" (18 mm)
1" (24 mm)
Width function OFF
Sizes (in points)
6, 9, 12
6, 9, 12, 18
6, 9, 12, 18, 24
6, 9, 12, 18, 24, 36
6, 9, 12, 18, 24, 36
Width function ON
47