Auto Cut Function - Brother P-touch 2200 Guía De Usuario

The Auto cut function allows you to set whether or not the machine will automatically cut off
a label after it is printed or each set of labels printed with the Numbering or Repeat printing
functions. Turn on the Auto cut function before starting to print in order to cut off the labels
automatically after printing them.
To turn on or off the Auto cut function:
After printing a label with the Auto cut function turned off, hold down
Feed&Cut
once to feed the tape, then cut it.
1 While holding down
current auto cut setting.
2 While still holding down
is displayed.
3 Release
EXAMPLE
To turn on the Auto cut function:
1
While holding down
once, and keep
2
While still holding down
pressing
3
Release

AUTO CUT FUNCTION

, press
, continue pressing
to apply the selected auto cut setting.
A.Cut
until ON is displayed.
.
A.Cut
once, and keep
A.Cut
A.Cut
, press
Alt
held down.
Caps
, continue
Alt
Caps
held down to display the
until the desired auto cut setting
A U T O C U T
O F F
A U T O C U T
O N
and press
Length
Undl/Frm
Wide
Length
Undl/Frm
Wide
65