Controls and Features
Deck Height
Lever
Lawn Mower controls and features are illustrated in Figure 4-1 and described on the following pages.
WARNING!
Read and follow all safety rules and instructions in this manual, including the entire Operation section,
before attempting to operate this machine. Failure to comply with all safety rules and instructions may result in personal
injury.
Throttle
Note: When operating the mower with
the cutting deck engaged, be certain
that the throttle/choke control is in the
Fast position.
The throttle control is used to adjust
engine speeds and to stop the engine.
Always run engine with the
throttle control lever in the Fast
position for best mower performance.
Fast: Use during mower operation.
Slow: Use when idling engine.
Stop: Stops the engine. (Non-electric
start units only).
Refer to Starting the Engine on page
14 in the Operation section of this manual for detailed starting
instructions.
Fuel Tank Cap
Figure 4-1
Fast
Slow
Stop
Throttle Control
Drive Control
Gear Shift Lever
Engine
Refer to the Engine Operator's Manual for details regarding all
engine-related controls and features.
Deck Height Lever
Use this lever to adjust the mowing deck's cutting height. To use,
move the lever to the left, then place the lever in the notch best
suited for your application.
4
Blade Control
Ignition Switch†
LCD Service Minder and Hour
Meter†
† If Equipped
11