Installing The Usb Device Driver - TANDD RTR-500DC Manual De Introducción

Installing the USB Device Driver

Have you already installed the supplied software?
Before connecting a Unit to a PC with a USB cable make sure to install the
supplied software first.
If the Base Unit is not an RTR-500DC, please follow directions for installing
the USB Device Drivers found in the Introductory Manual that came with the
Base Unit you are using.
1.
Open the "RTR-500DC
for Windows" from the
Start Screen or Start
Menu.
2.
Open the RTR-500DC
Settings Utility.
3.
Connect the Unit with the supplied USB cable to your computer. The
USB driver installation will start automatically.
- Do not connect a Unit to your computer until the software has been installed.
4.
After the USB driver installation is completed, the factory default
settings will be displayed automatically in the settings window.
Launcher Window
Preparación 27