Work Breaks; After Vacuuming - Fakir A 220 Instrucciones De Uso

Work breaks

After vacuuming

F
G
OPERATING
Use the park holder of the floor nozzle to hold the suctiontube
safely in position when the cleaner is not being used. To do
E
this, insert the park holder of the floor nozzle into the nozzle
holder " [E] " on the reverse of the appliance.
Follow the steps below as soon as you stop vacuum
cleaning. Never leave the appliances unattended.
1. Press the foot button On/Off " [B] " to switch off the va-
cuum cleaner.
2. Remove the plug from the mains socket.
B
3. Press the foot button cable rewind " [F] " to reel in the
cable. Gently guide the cable with your hand until the cable
has been completely wound in.
4. Insert the holder of the telescopic tube " [G] " into the park
rail on the underneath of the appliance. Now you can carry
the appliance easily or place it on the floor.
5. Store the vacuum cleaner in a place that is out of the reach
of children.
Never place the appliance next to heat sources and avoid
direct sunlight, as the heat may damage the vacuum cleaner.
WARNING!
ATTENTION!
en
13