Descargar Imprimir esta página

Denon Professional DN-V200 Instrucciones De Operación página 8

Ocultar thumbs Ver también para DN-V200:

Publicidad

ENGLISH
(4) Connecting to a AV amplifier with a Built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from
the DVD player's digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can
achieve sound with the power and sense of presence of a movie theater or concert hall.
DN-V200/DN-V300
Optical fiber cable
Front speaker (left)
AV amplifier with a built-in decoder
(AV control center)
Surround speaker (left)
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS
is played while using a decoder, etc., that is not DTS-compatible.
Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
2
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.
8
To power outlet
Center speaker
Front speaker (right)
Digital audio input
connector (OPTICAL)
Subwoofer
Surround speaker (right)
Line up in proper direction
Sound output from the DN-V200/DN-V300's digital audio output connectors
2
In the case of bit stream output
Audio recording format
Dolby Digital
Dolby Digital bitstream
DVD video
DTS
MPEG Audio
In the case of PCM output
Audio recording format
Copy protection ON
48 kHz / 16 ~ 24 bit
No output data (*1)
DVD
Linear
video
PCM
96 kHz / 16 ~ 24 bit
No output data (*2)
Video CD
MPEG 1
Music CD
44.1 kHz / 16 bit Linear PCM
MP3 CD
MP 3 (MPEG-1 Audio Layer 3)
*1 Only 48 kHz/16 bit sources are output.
*2 When playing copyright-protected linear PCM DVDs, in consideration of copyrights, no digital signals are
output for sources exceeding 48 kHz/16 bits. When playing such sources, either set to "96k>48k" or make
analog connections.
• Linear PCM audio is a signal recording format used for music CDs.
While signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to
96kHz/24 bit, providing higher sound quality than music CDs.
Settings
DIGITAL OUT
NORMAL
PCM
2 channels PCM
(48 kHz / 16 bit)
DTS bitstream
DTS bitstream
2 channels PCM
2 channels PCM
(48 kHz / 16 bit)
(48 kHz / 16 bit)
Settings
LPCM (44.1 kHz / 48 kHz)
OFF
Copy protection OFF
48 kHz / 16 ~ 24 bit PCM
48 kHz / 16 bit PCM
96 kHz / 16 ~ 24 bit PCM
48 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM
ON

Publicidad

Capítulos

Solución de problemas

loading

Este manual también es adecuado para:

Dn-v300