AERMEC DUALCHILLER CONTROL Instalación Y Uso página 12

STEP 1%
STEP 100%
Setpoints
S.Hot R
D.Tot.R
Must be set on the master board and
12
Setpoint
TOT.DIFF
Setpoint
3 TOTAL RECOVERY
are automatically updated on the slave
board. For reasons of consistency, all
the setpoints changed on the master
are also updated on the slave. If the
STEP
TOT.DIFF
user makes the changes on the slave
board, they will be overwritten, and the
changes (which in any case have no ef-
fect) will be lost.