Use Of Manual Functions- Before Starting - Jacuzzi morphosis MEGA Uso Y Mantenimiento

Use of manual functions - Before starting...
Before you use any function, you should adjust the water tem-
perature to the value you want by doing the following:
I Turn the dial (M) so that the notch matches up with the
chosen value. The knob is provided with a safety lock that fix-
es the temperature at 38°C; to select higher temperatures,
push the button (P).
The maximum temperature of the mixed water must not
exceed 45 °C.
I If you wish to try the water temperature, turn the diverter dial
(G) to the "showerhead" (E) position and turn the stop tap
(R) to let water come out.
I When the water is at the desired temperature, place the di-
al (G) on the position that identifies the selected function:
- (A): rainfall shower head
- (B): "Skin Touch" cascade
- (C/D): vertical hydromassage
- (E): shower
NOTE: it is also possible to use two functions at the same time:
just position the diverter dial half way between the two func-
tions (you will hear a "click"). If, for example, you wish to use
all the jets at the same time, you must turn the dial to the po-
sition between the symbols (C) and (D); naturally, there will be
a drop in water pressure and a decrease in the power of indi-
vidual jets.
Remember to turn off the stop tap every time after use
(R). If temperatures above 38 °C have been selected,
it is advisable to turn back the thermostatic mixer knob
(M) to the position before the safety lock
20
.