Snapper 2691525-00 Manual Del Operario página 10

1. Move the transmission shift lever to (N) Neutral.
See Wheel Drive.
WARNING
It is possible to start the engine with the transmission shift
lever in a drive position. DO NOT start the engine with the
transmission shift lever in a drive position.
2. Make sure that the Blade Lever (A, Figure 8) is OFF.
8
3. Press the Clutch/Brake Pedal (A, Figure 9) all the way
down and hold while starting the engine.
9
4. Move the engine speed control (A, Figure 10) to CHOKE
(B) to start a cold engine.
10
10
5. Turn the ignition key (A, Figure 11) to START until the
engine starts.
Note: If the engine does not start after 5 seconds, release the
key, make sure the Clutch/Brake Pedal is fully pressed, wait
20 seconds, and try starting again.
11