Playcore Swing-N-Slide PB 8233 Instrucciones De Montaje página 38

SLIDE INSTALLATION FOR PB 9230
Assembly Plan
Fig. 30a
2'' Below
Grade
1'' Truss screw
FOR PB 9230
SLIDE SOLD SEPARATELY
Slide Install.
1. Install Slide centered in the provided opening as shown in (Fig. 30).
2. Prepare a level area of ground where the bottom of the slide rests 2" below grade (Fig. 30a).
3. Mark where the slide's bottom meets the ground and drive a 2" x 4" x 17-1/4" stake until its top is 2'' above the
grade prepared in Step 3. For reference, see (Fig. 30a).
4. Attach Slide to Stake using (2) 1-1/4'' screws as shown in (Fig. 30).
(4)
1'' Truss
screws
Surfacing
Material
2'' Above
Grade
SLIDE
STAKE
38
Fig. 30
(2)
1-1/4'' screws
[PF 3583]
2'' x 4'' x 17-1/4''