PUREGEAR PURECAM 62097PG Guia De Instalacion página 5

INSTALLING THE PURECAM
PureCam MUST be installed on the windshield.
Note:
1. Clean and dry your windshield.
2. Attach the PureCam to the suction mount by sliding
the notch on the back of the suction mount into the
groove on the back of the PureCam. Slide to the right
to lock in place.
3. Locate the best position for your PureCam, ensuring
the screen is facing the inside of your vehicle.
4. Remove the protective liner from the suction mount
and stick to the windshield in the desired position.
Lock by pressing down on the lever.
5. To adjust the angle, loosen the socket nut and rotate.
Once you are satisfied with the position, screw the
socket nut to lock.
6. OPTIONAL: Use the included cable management clips
to organize the cables. To use, remove the protective
liner and place the clips on a flat surface such as the
dashboard or windshield.
5