Bushnell LEGEND T Serie Manual De Instrucciones página 8

USING THE MIL HASH TACTICAL RETICLE
The "mil-hash" reticle used in the Legend T Series FLP spotting scope is
a hashmarked reticle that uses MRAD based subtension lines for ranging,
holdover and windage corrections. 1 mil (milli-radian or MRAD) = 3.6
inches at 100 yards.
In order to facilitate accurate holdover and windage compensation, this
reticle uses hash marks spaced in 1 mil increments with .5 mil graduations.
It provides a total of 10 mils of holdover below the center dot on the
vertical crosshair and a total of 10 mils of subtension lines on the horizontal
crosshair. There are also more precise subtensions of .2 mils on the last mil
hash on both outer ends of the horizontal crosshair and on the bottom of
the vertical crosshair.
Because the mil-hash reticle is positioned in the first focal plane (FFP), reticle
measurements can be used with the scope set at any magnification. When the
zoom ring is used to vary the scope's magnification, the relative size of the
reticle will "track" right along with the zoom setting.
8
NEVER LOOK DIRECTLY AT THE SUN WITH YOUR SCOPE,
AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES !
2 Mils
1 Mil