Gewiss CHORUS GW 10 703 Manual De Usuario página 33

USER INSTRUCTIONS
Setting parameters
Setting set point T2
The temperature value starts to blink when the
bol appears.
Adjust the value of T2 using the
Press the MODE key within 30 seconds to confirm the
value set.
Setting set point T3
The temperature value starts to blink when the
bol appears.
Adjust the value of T3 using the
Press the MODE key within 30 seconds to confirm the
value set.
Setting the antifreeze/high temperature protection
temperature value
The temperature value starts to blink.
Depending on the type of operation (heating/air condi-
tioning), the antifreeze/high temperature protection tem-
perature value can be adjusted using the
Press the MODE key within 30 seconds to confirm the
value set.
There are the following constraints for the set point val-
ues: Heating: T antifreeze < T1 < T2 < T3 –
Air conditioning: T1 < T2 < T3 < T high temperature
33
sym-
keys.
sym-
keys.
keys.
E
N
G
L
I
S
H