T RO U B L E S H O OT I N G
BEFORE CALLING FOR SERVICE
Problem
Water in the washer
drains slowly or not
at all, or the display
shows:
ERROR
NOT DRAINING.
CHECK THE DRAIN
HOSE & FILTER.
Washer fills with
water slowly or not
at all, or the display
shows:
ERROR
NO WATER
SUPPLY.
CHECK TAP
& HOSE.
Washer will not
turn on
Washer won't
spin, or the display
shows:
ERROR
THE DOOR IS
OPEN.PLEASE
CLOSE THE DOOR
COMPLETELY.
Door will not
unlock when cycle
is stopped or
paused
Wash cycle time is
longer than usual
Musty or mildewy
odor in washer
Steam is not visible
during STEAM cycle
32
(cont.)
Possible Causes
or clogged.
open fully.
pinched, or bent.
house is too low.
plugged in.
breaker has tripped, or power
outage has occurred.
properly.
is too high.
too high.
adjusts the wash time for
the amount of laundry, water
pressure, water temperature,
and other operating conditions.
detergent has been used.
properly.
Solutions
and is not pinched behind or under the washer.
section.
careful when moving the washer.
section.
household water pressure is adequate.
grounded, 3-prong, 120-VAC, 60-Hz. outlet.
fuse capacity. If the problem is a circuit overload,
have it corrected by a qualified electrician.
the START/PAUSE button. After starting a cycle, it
may take a few moments before the drum begins to
turn or spin. The washer will not spin unless the door
is locked (DOOR LOCK will appear in the display).
error message is displayed, call for service.
Allow the washer to cool until the DOOR LOCK
indicator turns off in the display.
Allow the washer to complete the programmed cycle, or
select the Drain & Spin cycle (see the page 23 for details)
to drain the water.
automatically to provide optimal results for the
selected cycle.
accordance with the manufacturer's instructions.
wipe around and under the door seal frequently.
requires very small amounts of steam to achieve
optimal results. Excess steam could damage fabrics
and reduce efficiency.
Care and Cleaning
Care and Cleaning