Customising The Daily Programme; Programming Status Prog - Gewiss Chorus GW 10 761 Manual De Usuario

To customise the preset daily programme, or modify the settings, press the
key twice.
USER INSTRUCTIONS

Customising the daily programme

The message "PROG" is displayed on the VDU, while the
bar of the first day of the week starts to blink.
Select the required day using the
Press the
selection.
After confirmation of the day, the current profile, relative
to the day selected, is displayed on the screen.
The time will start to blink.
Follow the steps below to customise the settings:
1 - select the starting time for the change in
temperature
2 - set the new temperature set point
3 - completing the customisation process
1 - Select the starting time for the change in
temperature
Use the
the profile you wish to change; the selected time column
flashes as the hour profile increases. The time is
decremented/incremented in steps of 15 minutes each
time the
define up to 4 programming periods each hour.
key within 30 seconds to confirm the
keys to change the time until you reach
keys are pressed, so it is possible to
53
keys.
E
N
G
L
I
S
H