Mosa MAGIC WELD Manual Del Usuario página 53

© MOSA REV.1-03/05
How to put two machines in parallel:
from the front panels of the machines connect the two positives welding sockets(+) between
themselves and the two negative welding sockets bethween themselves.
To effect the connection ask for the accessory K2X150.
ATTENTION: use fit cables and tight at the connection point.
How to proceed:
- start the machine putting the two welding handles (T) in the wanted position (half of the total
current);
- put in parallel with the right cables;
- proceed with welding.
Parallel engine driven welder
M
MAGIC WELD 34.3