Closing Force Adjustment; Deleting The Opening And Closing Limit Switch - FAAC TM2 ERX Manual De Instrucciones

CLOSING FORCE ADJUSTMENT

+
B C
Tn
This system is the only one of its kind and it gua-
rantees that rolling shutters (which are equipped
with lockdown hangers) remain perfectly closed
without any danger of the slats suffering excessive
pressure. The system works in all kinds of appli-
cations because of the opportunity of manually
adjusting the closing force.
The TM2 ERX is factory set to a closing force of 20 % of the nominal torque. This
force can be changed very easily by the remote control. It can be reduced by 10 %
or increased up to 40 %, depending on the desired result.

DELETING THE OPENING AND CLOSING LIMIT SWITCH

Tn: Already programmed remote control
+
B C
Tn
TM2 ERX
A
+
B C
Tn
34
A
40 %
B
20 %
C
10 %
2 sec
+
B C
Tn (4 sec)
A4518_6G41_Rev.A