Important Safety Information - Olimpia splendid Ci2 wall 45.2 Instrucciones Para La Instalación

11. Before out from factory, FAN COIL UNIT (AIR UNITS) has passed ....
.... Fan Coil Overpressure Resistant Test,
.... Statically and Dynamically Balanced Adjustment,
.... Noise Test,
.... Air (cool) Volume Test,
.... Electric Property Test,
.... Outline Quality Detection.
12. After completing the installation, make sure that the unit operates properly
during the start-up operation. Please instruct the customer on how to
operate the unit and keep it maintained.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

0.4 - IMPORTANT SAFETY INFORMATION

The safety precautions listed are divided into two categories. In either case,
important safety information is listed which must be read carefully.
WARNING
Failure to observe a warning may result in death.
WARNING
Failure to observe a caution may result in injury or damage to the equipment.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
WARNING
1. Be sure only trained and qualified service personnel to install, repair or
service the equipment.
Improper installation, repair, and maintenance may result in electric shocks,
short-circuit, leaks, fire or other damage to the equipment.
2. Install according to this installation instructions strictly.
If installation is defective, it will cause water leakage, electrical shock and
fire.
3. When installing the unit in a small room, take measures against to keep
refrigerant concentration from exceeding allowable safety limits in the event
of refrigerant leakage. Contact the place of purchase for more information.
Excessive refrigerant in a closed ambient can lead to oxygen deficiency.
4. Use the attached accessories parts and specified parts for installation.
Otherwise, it will cause the set to fall, water leakage, electrical shock and
fire.
EN - 6