Cleaning - Fisher&Paykel Intuitive DEIX2 Instructivo De Instalacion Y Guia Del Usuario

Ocultar thumbs Ver también para Intuitive DEIX2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning

Clean your dryer with a soft damp cloth and wipe dry. Do not use
scouring cleaners as they can damage the paint and plastic surfaces.
Removing the Lid
You can remove the lid for cleaning. Open the lid fully, hold one side
with one hand and tap the other side with an upwards motion. To
replace the lid, hold the lid vertically and align both hinges before
clicking back into place.
Pre-Treatment Sprays
Do not use pre-treatment sprays or liquids on or near your dryer as they can damage your
machine's control panel as well as any of its plastic parts. Damage to your dryer caused by pre-
treatment products will not be covered by your warranty.
Stains
If stains appear inside the drum of your machine, mix a detergent and water paste (or use a non-
flammable liquid cleaner) and wipe over the stain with a soft cloth. Then tumble old towels for
20 – 40 minutes on the AIR DRY setting to remove all traces of the cleaner.
Lint Bucket
The lint bucket will need to be emptied before the lint reaches the top of the transparent
section. A lint bucket that is not full ensures your clothes will remain lint-free and your dryer will
operate at maximum efficiency.
Venting
Inspect and clean all ducting at least once a year to remove accumulated lint. Check frequently
that any damper on the exhaust hood moves sufficiently and opens and shuts freely.
Ensure that the area around the dryer is kept clear and free from combustible materials, gasoline
and other flammable vapors or liquids. Ensure also that the dyer area is kept clear and free from
items that would obstruct the flow of combustion and ventilation air.
50

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Intuitive dgix2

Tabla de contenido