SANUS VuePoint F215b Manual De Instrucciones página 13

3. Drill pilot holes.
IMPORTANT: Pilot holes must be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
19
4. Tighten the lag bolts
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3
20
only until the washers are pulled firmly against the wall plate
17
4
75 mm
(3 in.)
5.5 mm
(7/32 in.)
18
.
18
20
19
STEP 2
13