Start-Up; Switching The Product On / Off Using The Remote Control; Controlling The Light Effects Using The Remote Control - LIVARNO LUX HG02044 Instrucciones De Utilización Y De Seguridad

Start-up

Switching the pro-
duct on / off using
the remote control
Note: The infrared receiver
is located on the LED driver
Always aim the remote control
directly at the infrared receiver for
best reception. The range of the
remote control is approx. 6–8 m.
Note: Remove the insulating strip
from the battery compartment be-
fore using the remote control for
the first time.
Be sure there are no obstacles
between the transmitter and
receiver.
Press the
remote control to switch the
LED strip
2
Please remember the power
supply will continue to draw
a small amount of electricity
even without the light being
operated so long as the
power supply
into the socket. To switch the
product off completely, unplug
the power supply
socket.
26 GB/IE
6
.
4
7
button on the
on or off.
is plugged
3
from the
3
Controlling the
light effects using
the remote control
Note: Please refer to the included
instructions for use for the remote
control for a detailed description
of the remote control
The remote control has 24 buttons.
These buttons can be divided into
the following groups:
Static colour selection
buttons
These buttons control the
CS
colour mode of the entire
LED strip. Combined with
C3
the program buttons you
C7
can define the colour se-
C16
lection of most light pro-
grams.
w/cw
Light program buttons
Auto
Flash
Jump
Meteor
functions.
7
The LED strip
features
14 different
light programs.
Preselecting the
colour using the
colour selection
buttons will set