Load Default; Osd Appearance; Auto Scan Mode; Status Page - Tripp-Lite NetController B040-008-1 Manual Del Propietário

3. Operation

3.3.7 Load Default

The Load Default setting allows you to restore the OSD's factory default settings (Port Names, Auto Scan Period, Title Bar, etc.). Restoring the OSD's
factory default settings will not affect the KVMs password security. To restore the default settings, highlight the Load Default settings and press the
[Enter] key. You will be prompted to verify that you want to restore the OSD's factory default settings. If yes, highlight the yes option and press the
[Enter] key.

3.3.8 OSD Appearance

The OSD Appearance setting allows you to keep the OSD open after switching ports via the OSD Main Menu. To turn this setting on, highlight it and
← →
press the [ ] and [ ] keys to toggle it On/Off, and then press the [Enter] key. This setting is turned off by default.

3.3.9 Auto Scan Mode

The Auto Scan Mode setting allows you to specify which ports are accessed during an Auto Scan. You can choose from the following options: All –
All ports will be scanned, regardless of whether they have a computer connected to them or not. Live – Only ports that have a connected computer
that is powered on will be accessed EzV – All ports that are marked as Easy View ports will be scanned, regardless of whether they have a computer
connected to them or not. EzV + Live – Only ports that are marked as Easy View ports and have a connected, powered on computer will be accessed.
To switch between these options, highlight the Auto Scan Mode setting and use the [
selected the desired option, press the [Enter] key.

3.3.10 Status Page

When in the OSD Setup Page, press the [F1] key to switch to the OSD Status Page. The OSD Status Page displays all of the KVM switches in the
installation and their firmware version numbers. When in the OSD Status Page, press the [F1] key to switch to the OSD Main Menu.

3.4 Upgrade Firmware

All firmware upgrades for the B040/42-Series KVM Switches will be available in the Support Section of www.tripplite.com. (If there are no updates
posted, there are none currently available.) Before downloading the firmware files, verify that the firmware version on the website is more current that
that of your KVM switch. You can find your KVM switches firmware version by navigating to the Status Page in the OSD. You can also use the Firmware
Upgrade Utility to check your firmware version. (See below) To perform a firmware upgrade, follow these instructions:
Step 1: Using the provided Firmware Upgrade Cable, connect a standalone computer (one not already connected to the KVM Switches Server Port) to
the KVM Switch. If you have multiple KVM Switches daisy-chained together, connect the Firmware Upgrade Cable to the Master KVM Switch
(the first KVM in the daisy-chain). All KVM switches daisy-chained from the Master KVM switch will be upgraded simultaneously.
Step 2: Go to the Support section of www.tripplite.com and download the firmware upgrade utility and upgrade file.
Step 3: Before upgrading the firmware on your NetController KVM Switch, disable all running programs (anti-virus, system monitoring, etc.) on the
standalone computer you are using to perform the upgrade. These programs may prevent the firmware upgrade from completing successfully.
Step 4: Locate the .exe file you just downloaded and double-click on it. The KVM Upgrade Utility screen will open.
← →
] and [ ] keys to toggle between them. When you have
10