External Views - Tripp-Lite NetController B040-008-1 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Features

1.5 External Views

Console KVM Switch Front View
1
2
3
4
5
6
7
1
Upper Handle: Pull to slide the KVM Switch out; push to slide the KVM Switch in.
2
19" LCD Display: Built-in on-screen display (OSD) for convenient KVM Switch control, including port selection.
3
OSD Push Buttons: Used to access the OSD Menu to adjust the LCD display.
4
LED Indicators: The red LEDs will illuminate above each port with a connected computer that is running power through the console interface. If the
connected computer is powered off, the red LED will not be illuminated. The green LEDs will illuminate above the computer port that is currently
selected as active.
5
Port Selection Buttons: Push to directly select the active computer channel that can be controlled by the shared keyboard, touch pad and LCD
display
6
Keyboard
7
2-Button Touch Pad: Left button is left click, right is right click. Run your finger up or down the far right side of the touch pad to scroll up and down
a screen.
8
Rackmounting Brackets: There are rackmount brackets to secure the chassis to a system rack located at each corner of the unit.
Rackmount KVM Switch Front View
1
Port Selection Buttons: Push to directly select the active computer channel that can be controlled by the shared keyboard, monitor and mouse.
2
Bank LED Display: Shows the position of the B042-Series KVM Switch in a daisy-chain installation.
3
Live LED Indicators: A red LED will illuminate when the corresponding port has a computer that is both connected and powered-on.
4
Selected LED Indicators: A green LED will illuminate when the computer connected to the corresponding port has the KVM's focus.
4
3
3
8
1
2

Publicidad

Tabla de contenido
loading

Tabla de contenido