Emptying And Cleaning The Dust Container - Philips FC8820 Manual Del Usaurio

English
4
1
3
2
3
2
1

Emptying and cleaning the dust container

Use a brush with soft bristles e.g. a toothbrush to remove dust or fluff
from the drop-off sensors and to clean the suction opening.
Note: It is important that you clean the drop-off sensors regularly. If the
drop-off sensors are dirty, the robot may fail to detect height differences
or staircases.
Use a brush with soft bristles e.g. a toothbrush to remove dust or fluff
from the front wheel and side wheels.
To clean the side brushes, grab them by the bristles and pull them off
their shafts.
Remove fluff, hairs and threads from the shaft and from the side brush
with a soft brush e.g. a toothbrush or a cloth.
Check the side brushes and the bottom of the robot for any sharp objects
that could damage your floor.
Empty and clean the dust container when the dust container full indicator
lights up continuously.
Make sure that the power switch is in 'off' position.